Full face gasket(FF Gasket)                                                                     Ring flange gasket (RF Gasket)                               

Flange Gaskets for PN16/PN25/PN64-DI/CI/MS Pipe

The medium used in the middle of the pipe connection is a ring made of a material that produces plastic deformation and has a certain strength. Most of the gaskets are cut from non-metallic plates or made by professional factories in the specified size.

The gasket materials should be chemically and thermally compatible with the internal fluid and the external environment, and should be of appropriate hardness, thickness, and style. Elevated temperature applications may require higher temperature capability. Gasket materials are not limited to those shown in Table 22. Other materials may also be suitable.

Gasket thickness should be about 1/8"-3/16" (3-5 mm), and about 55-75 durometer Type A hardness per ASTM D2240.Too soft or too thick gaskets may blow out under pressure. Overly hard gaskets may not seal.




Both ring gaskets and full face gaskets come in metric and standard sizes, and in various thicknesses. R.S.L. Gasket specializes in the fabrication and production of custom flange gaskets, ring gaskets, and full face gaskets.

R.S.L. Gasket can custom manufacture and fabricate flange gaskets, ring gaskets, manway gaskets and full face gaskets in a variety of materials from our inventory, including:

Nitrile (Buna-N)
Ethylene Propylene Rubber (EPR)
Silicone
Neoprene
Polyurethane
Viton®/ FKM

The above table is just a small sampling of the types of materials available for the custom fabrication and manufacture of flange gaskets, ring gaskets and full faced gaskets.
If you have special needs, please contact us immediately, our professional technical engineers will design a satisfactory solution for you.


Flange gaskets, ring gaskets and full face gaskets are used in a wide range of industries such as:

● Electronic
● Medical
● Packaging
● Plumbing
● Chemical
● Petrochemical, Oil and Gas - Pipelines
● HVAC (Heating, Ventilation, Air Conditioning
● Food
● Breweries



Flange gasket installation:




In its simplest form, a flange gasket is used to join or fit between two sections of pipe; each pipe section typically has a flared area that provides a surface for the gasket to attach to. Types of flange gaskets include ring gaskets and full face gaskets.

Both ring gaskets and full face gaskets come in metric and standard sizes, and in various thicknesses. R.S.L. Gasket specializes in the fabrication and production of custom flange gaskets, ring gaskets, and full face gaskets.
One of the many areas that R.S.L. Gasket has developed an expertise in is flange gaskets. Whether it is a custom or standard flange gasket, ring gasket, or full face gasket, R.S.L. Gasket has the extensive in-stock inventory and knowledgeable engineering and production staff to produce the specific custom gasket or custom seal that is needed.

With full in-house engineering support available, R.S.L. Gasket can assist you with custom designing the flange gaskets that your specific application requires. From handmade specials made by our skilled craftsmen, to low-volume through high-volume production runs, R.S.L. Gasket can meet all your custom flange gasket needs. With over ninety years of experience in custom gasket and custom seal fabrication and hundreds of satisfied clients, R.S.L. Gasket can assist you with your unique specifications – give us a call or request a quote today!